README

• Introduction
• Installation
• Configuration
  • Built-in
  • Custom Notification
  • Custom Policies
  • Custom Drivers
• Contribute

Introduction

This package allow you to enable two-factor authentication in your Laravel applications very easily, without the need to add middleware or any modification to your routes. It stores tokens in your database in a distinct table, so you don't need to alter your users table. Notify users about their token via mail, SMS or any custom channel.

Includes native conditionnal check to trigger or not 2FA : you may skip the check when the user is using a known browser, IP address, IP Geo location, or any custom rule.

This package was inspired by the srmklive/laravel-twofactor-authentication package, which supports the Authy 2FA auth.

Installation

1. Use composer to install the package :

composer require Airondev-agency/laravel-2fa

1. Add the service provider to your providers array in config/app.php file like so:

'providers' => [   
    [...]
    /*
     * Package Service Providers...
     */
    Airondev\Laravel2FA\Laravel2FAServiceProvider::class,
],

1. Run the following command to publish assets :

php artisan vendor:publish --provider "Airondev\Laravel2FA\Laravel2FAServiceProvider"

1. Run the following command to migrate database :

php artisan migrate

1. Add the following lines in your User model (e.g App\Models\User.php)

• Before the class declaration, add these lines:

use Airondev\Laravel2FA\TwoFactorAuthenticatable;
use Airondev\Laravel2FA\Contracts\TwoFactorAuthenticatableContract;

• Alter the class definition to implements the TwoFactorAuthenticatableContract contract :

class User extends Authenticatable implements AuthenticatableContract,
                                              AuthorizableContract,
                                              CanResetPasswordContract,
                                              TwoFactorAuthenticatableContract

• Add the TwoFactorAuthenticatable trait :

use Authenticatable,
    Authorizable, 
    CanResetPassword, 
    TwoFactorAuthenticatable;

1. Make sure your user model is using the Notifiable trait.

2. You need to change the login workflow by adding the authenticated method to your app\Http\Controllers\Auth\LoginController.php class.

<?php

namespace App\Http\Controllers\Auth;

use Airondev\Laravel2FA\TwoFactorAuth;

class LoginController extends Controller
{
    /** [...] **/

    /**
     * The user has been authenticated.
     *
     * @param  \Illuminate\Http\Request  $request
     * @param  mixed  $user
     * @return mixed
     */
    protected function authenticated(Request $request, $user)
    {
        # Trigger 2FA if necessary.
        if (TwoFactorAuth::getDriver()->mustTrigger($request, $user)) {
            return TwoFactorAuth::getDriver()->trigger($request, $user);
        }

        # If not, do the usual job.
        return redirect()->intended($this->redirectPath());
    }      

🚀 You may also use the shorthand version if you like it most :

    /**
     * The user has been authenticated.
     *
     * @param  \Illuminate\Http\Request  $request
     * @param  mixed  $user
     * @return mixed
     */
    protected function authenticated(Request $request, $user)
    {
        return TwoFactorAuth::getDriver()->maybeTrigger($request, $user) 
                ?: redirect()->intended($this->redirectPath());
    }

That's it ! Now you want to personalize your view and see the configuration section.

Building the view

When you published the package assets, a new resources/views/auth/2fa/token.blade.php file has been created. It's up to you how you design this page, but you MUST keep the token form input name and send the form to the route('auth.2fa.store') route.

You may notice a $reason variable which tells you why the 2FA auth has been triggered. It's up to you to display it to the user or not, based on your app needs.

Configuration

All configurations are set in the config/laravel-2fa.php file which have been created when you published the package.

Built-in

First of all, you will need to choose which policies applies. A Policy job is to check if the two-factor auth must occur, or if it can be skipped (e.g : the browser is known ? skeep the two-factor auth).

The policies are defined in the policy key. Rules can be combined, with an order of priority. Each policy is called, and tells the driver if it should trigger the two-factor auth. When a policy requires a two-factor auth, the check stop and its returned message will be used as the $reason in the view (see Building the view section).

If none of policies triggers, or if the policy array is empty, the two-factor authentication is skipped and the user logs in normally.

return [
    'policy' => [
        'browser',  // first check if we know the browser
        'geoip',    // if so, check if we know the user ip location

        // if so, no more rules : skip 2FA.
    ],
];

Built-in policies are :

ℹ️ Need to create your own policy ? See Custom Policies section below.

Some policies has additionnal settings, which are self-documented in the configuration file.

return [
    /*
    |--------------------------------------------------------------------------
    | The 2FA package options.
    |--------------------------------------------------------------------------
    |
    | Here you may specify the package options, such as policies parameters.
    |
    */

    'options' => [
        # 2FA token lifetime in minutes.
        'token_lifetime' => 10,

        'policies' => [
            # Can be one of "country", "region", "city", "time_zone".
            'geoip'   => 'country',
            
            # Cookie expiration time in minutes (default 30 days).
            'browser' => 30 * 1440,
        ],
    ],
];

Cutom notification

This package uses the laravel notifications system. The built-in notification TwoFactorToken sends the two-factor token to the user via mail.

You can extend this notification and configure other channels such as SMS by extending this class :

<?php

namespace App\Notifications;

use Airondev\Laravel2FA\Notifications\TwoFactorToken as BaseTwoFactorToken;

class TwoFactorToken extends BaseTwoFactorToken
{
    /**
     * Get the notification's delivery channels.
     *
     * @param  mixed  $notifiable
     * @return array
     */
    public function via($notifiable)
    {
        return [
            'nexmo',
        ];
    }

    /**
     * Get the Vonage / SMS representation of the notification.
     *
     * @param  mixed  $notifiable
     * @return NexmoMessage
     */
    public function toNexmo($notifiable)
    {
        return (new NexmoMessage)
                    ->content('Your two-factor token is ' . $this->token)
                    ->from('MYAPP');
    }
}

You'll need to change the notification configuration key to specify your new notification class :

return [
    [...]
    /*
    |--------------------------------------------------------------------------
    | The 2FA notification containing the token.
    |--------------------------------------------------------------------------
    |
    | Here you may specify an alternative notification to use.
    |
    */

    'notification' => \App\Notifications\TwoFactorToken::class,
];

Custom policies

If you are not satisfied by built-in policies, you may overwrite an existing policy or create you own.
All policies MUST extending the AbstractPolicy.

To overwrite an existing policy, you may directly extend the policy class :

<?php

namespace App\Auth\Policies;

use Airondev\Laravel2FA\Policies\IpPolicy as BaseIpPolicy;

class IpPolicy extends BaseIpPolicy
{
    /**
     * Check that the request passes the policy.
     * If this return false, the 2FA Auth will be triggered.
     *
     * @return bool
     */
    public function passes(): bool
    {
        # Passes the check if the user didn't activate IpPolicy on his account.
        if ( ! $this->user->hasTwoFactorAuthActiveForIp()) {
            return true;
        }

        # Else, run the IpPolicy check.
        return parent::passes();
    }
    
    /**
     * The reason sent to the Notification and the frontend view,
     * to tell the user why the 2FA check was triggered.
     *
     * @return string
     */
    public function message(): string
    {
        return $this->message ?: __('your account activated 2FA for unknown IP adresses.');
    }
}

Then, change the mapping array in the settings :

return [
    [...]

    'mapping' => [
        [...]
        'ip' => \Auth\Policies\IpPolicy::class,
    ],
];

ℹ️ The AbstractPolicy has 3 available properties your may use to build your Policy check in the passes() method :

/**
 * The incomming request at login.
 * 
 * @var \Illuminate\Http\Request
 */
protected $request = null;

/**
 * The user that just loggued in.
 * 
 * @var \Airondev\Laravel2FA\Contracts\TwoFactorAuthenticatableContract
 */
protected $user = null;

/**
 * The login attempt, with UID and IP address data.
 * 
 * @var \Airondev\Laravel2FA\Models\LoginAttempt
 */
protected $attempt = null;

Creating a policy is trivial. For example, let's say your user might activate 2FA for their account in settings. You could create a policy which verify if the user activated 2FA, and if so fails the passes() method, which result in triggering the 2FA auth :

<?php

namespace App\Auth\Policies;

use Airondev\Laravel2FA\Policies\AbstractPolicy;

class ActivePolicy extends AbstractPolicy
{
    /**
     * Check that the request passes the policy.
     * If this return false, the 2FA Auth will be triggered.
     *
     * @return bool
     */
    public function passes(): bool
    {
        return $this->user->hasTwoFactorAuthActive() ? false : true;
    }

    /**
     * The reason sent to the Notification and the frontend view,
     * to tell the user why the 2FA check was triggered.
     *
     * @return string
     */
    public function message(): string
    {
        return $this->message ?: __('your account activated the 2FA auth');
    }
}

You may also have different checks which results in different $reason messages :

<?php

namespace App\Auth\Policies;

use Airondev\Laravel2FA\Policies\AbstractPolicy;

class ActivePolicy extends AbstractPolicy
{
    /**
     * Check that the request passes the policy.
     * If this return false, the 2FA Auth will be triggered.
     *
     * @return bool
     */
    public function passes(): bool
    {
        if ($this->user->hasTwoFactorAuthActive()) {
            $this->message = __('your account activated the 2FA auth');
            return false;
        }
        
        if ($this->user->didntSpecifyTwoAuthActive()) {
            $this->message = __('2FA auth is activated by default');
            return false;
        }

        if (anyReason()) {
            return false; // will use the default reason used in message() method.
        }

        return true;
    }

    /**
     * The reason sent to the Notification and the frontend view,
     * to tell the user why the 2FA check was triggered.
     *
     * @return string
     */
    public function message(): string
    {
        return $this->message ?: __('2FA auth is automatically activated for your account');
    }
}

After creating your policy, you may use it in configuration file :

return [
    'policy' => [
        \Auth\Policies\ActivePolicy::class,
    ],
];

Event better, you can create a shortname to keep your policy array clean !

return [
    'policy' => [
        'active',  // your new rule !
        'browser', // if 2FA is not activated for the account, will check anyways if the browser is known
    ],

    [...]

    'mapping' => [
        [...]
        'active' => \Auth\Policies\ActivePolicy::class,
    ],
];

Some policies need to perform actions when a user successfully log in with 2FA complete (e.g: write a cookie or something in the database). You can define your callback in the onSucceed() method of your Policy :

    /**
     * An action to perform on successful 2FA login.
     * May be used to remember stuff for the next policy check.
     *
     * @return void
     */
    public function onSucceed(): void
    {
        Cookie::queue(
            '2fa_remember',
            $this->attempt->uid,
            1440
        );
    }

Custom driver

If you need more flexibility in the whole process, you can extend the BaseDriver class and change its workflow by overwriting any method.

namespace App\Auth\Drivers;

use Airondev\Laravel2FA\Drivers\BaseDriver;
use Airondev\Laravel2FA\Contracts\TwoFactorAuthenticatableContract as Authenticatable;

class CustomDriver extends BaseDriver
{
    /**
     * Check if must trigger 2FA token for this user.
     *
     * @param \Illuminate\Http\Request $request
     * @param \Airondev\Laravel2FA\Contracts\TwoFactorAuthenticatableContract $user
     *
     * @return bool
     */
    public function mustTrigger(Request $request, Authenticatable $user): bool
    {
        // custom workflow.
    }
}

Don't forget to update the driver key in the config file :

return [
    'driver' => \App\Auth\Drivers\CustomDriver::class;
];

⚠️ If you wish to build a driver from scratch, you MUST implement the TwoFactorDriverContract.

Contribute

Feel free to contribute to the package !
If you find any security issue, please contact me at thomas@Airondev.agency instead of creating a public github issue.

First contribution guide

Credits

• Thomas Georgel
• All Contributors

License

The MIT License (MIT). Please see License File for more information.# laravel-2fa

laravel-2fa

laravel-2fa