README

Shield

The easiest and most intuitive way to add access management to your Filament Admin:

• 🔥 Resources
• 🔥 Pages
• 🔥 Widgets
• 🔥 Custom Permissions

Note

For Filament 2.x use 2.x branch

Important

Prior to v3.1.0 Shield supported spatie/laravel-permission:^5.0 and now it supports version ^6.0. Which has some breaking changes around migrations. If you are upgrading from a version prior to v3.1.0 please make sure to remove the old migration file and republish the new one.

Installation

1. Install the package via composer:

composer require bezhansalleh/filament-shield

1. Add the Spatie\Permission\Traits\HasRoles trait to your User model(s):

use Illuminate\Foundation\Auth\User as Authenticatable;
use Spatie\Permission\Traits\HasRoles;

class User extends Authenticatable
{
    use HasRoles;

    // ...
}

1. Publish the config file then setup your configuration:

php artisan vendor:publish --tag=filament-shield-config

1. Register the plugin for the Filament Panels you want

public function panel(Panel $panel): Panel
{
    return $panel
        ->plugins([
            \BezhanSalleh\FilamentShield\FilamentShieldPlugin::make()
        ]);
}

1. Now run the following command to install shield:

php artisan shield:install

Follow the prompts and enjoy!

Filament Panels

If you want to enable Shield for more than one panel then you need to register the plugin for each panel as mentioned above.

Panel Access

Shield comes with the HasPanelShield trait which provides an easy way to integrate Shield's conventions with the Filament's panel access system.

The HasPanelShield trait provides an implementation for the canAccessPanel method, determining access based on whether the user possesses the super_admin role or the panel_user role. It also assigns the panel_user role to the user upon creation and removes it upon deletion. Ofcourse the role names can be changed from the plugin's configuration file.

use BezhanSalleh\FilamentShield\Traits\HasPanelShield;
use Filament\Models\Contracts\FilamentUser;
use Illuminate\Foundation\Auth\User as Authenticatable;
use Spatie\Permission\Traits\HasRoles;

class User extends Authenticatable implements FilamentUser
{
    use HasRoles;
    use HasPanelShield;
    // ...
}

Resources

Generally there are two scenarios that shield handles permissions for your Filament resources.

Default

Out of the box Shield handles the predefined permissions for Filament resources. So if that's all that you need you are all set. If you need to add a single permission (for instance lock) and have it available for all your resources just append it to the following config key:

    permission_prefixes' => [
        'resource' => [
            'view',
            'view_any',
            'create',
            'update',
            'restore',
            'restore_any',
            'replicate',
            'reorder',
            'delete',
            'delete_any',
            'force_delete',
            'force_delete_any',
            'lock'
        ],
        ...
    ],

💡 Now you are thinking what if I need a permission to be only available for just one resource? No worries, that's where Custom Permissions come to play.

Custom Permissions

To define custom permissions per Resource your Resource must implement the HasShieldPermissions contract. This contract has a getPermissionPrefixes() method which returns an array of permission prefixes for your Resource.

Consider you have a PostResource and you want a couple of the predefined permissions plus a new permission called publish_posts to be only available for PostResource only.

<?php

namespace BezhanSalleh\FilamentShield\Resources;

use BezhanSalleh\FilamentShield\Contracts\HasShieldPermissions;
...

class PostResource extends Resource implements HasShieldPermissions
{
    ...

    public static function getPermissionPrefixes(): array
    {
        return [
            'view',
            'view_any',
            'create',
            'update',
            'delete',
            'delete_any',
            'publish'
        ];
    }

    ...
}

In the above example the getPermissionPrefixes() method returns the permission prefixes Shield needs to generate the permissions.

✅ Now to enforce publish_post permission headover to your PostPolicy and add a publish() method:

    /**
     * Determine whether the user can publish posts.
     *
     * @param  \App\Models\User  $admin
     * @return \Illuminate\Auth\Access\Response|bool
     */
    public function publish(User $user)
    {
        return $user->can('publish_post');
    } 

🅰️/🈯️ To make the prefix translatable, publish Shield's translations and append the prefix inside resource_permission_prefixes_labels as key and it's translation as value for the languages you need.

//lang/en/filament-shield.php
'resource_permission_prefixes_labels' => [
    'publish' => 'Publish'    
],
//lang/es/filament-shield.php
'resource_permission_prefixes_labels' => [
    'publish' => 'Publicar'    
],

Configure Permission Identifier

By default the permission identifier is generated as follow:

Str::of($resource)
    ->afterLast('Resources\\')
    ->before('Resource')
    ->replace('\\', '')
    ->snake()
    ->replace('_', '::');

So for instance if you have a resource like App\Filament\Resources\Shop\CategoryResource then the permission identifier would be shop::category and then it would be prefixed with your defined prefixes or what comes default with shield.

If you wish to change the default behaviour, then you can call the static configurePermissionIdentifierUsing() method inside a service provider's boot() method, to which you pass a Closure to modify the logic. The Closure receives the fully qualified class name of the resource as $resource which gives you the ability to access any property or method defined within the resource.

For example, if you wish to use the model name as the permission identifier, you can do it like so:

use BezhanSalleh\FilamentShield\Facades\FilamentShield;

FilamentShield::configurePermissionIdentifierUsing(
    fn($resource) => str($resource::getModel())
        ->afterLast('\\')
        ->lower()
        ->toString()
);

Warning Keep in mind that ensuring the uniqueness of the permission identifier is now up to you.

Custom Navigation Group

By default the english translation renders Roles and Permissions under 'Filament Shield' if you wish to change this, first publish the translations files and change the relative locale to the group of your choosing for example:

'nav.group' => 'Filament Shield',

to

'nav.group' => 'User Management',

apply this to each language you have groups in.

Pages

If you have generated permissions for Pages you can toggle the page's navigation from sidebar and restricted access to the page. You can set this up manually but this package comes with a HasPageShield trait to speed up this process. All you have to do is use the trait in you pages:

<?php

namespace App\Filament\Pages;

use ...;
use BezhanSalleh\FilamentShield\Traits\HasPageShield;

class MyPage extends Page
{
    use HasPageShield;
    ...
}

📕 HasPageShield uses the booted method to check the user's permissions and makes sure to execute the booted page method in the parent page if exists.

Pages Hooks

However if you need to perform some methods before and after the booted method you can declare the next hooks methods in your filament page.

<?php

namespace App\Filament\Pages;

use ...;
use BezhanSalleh\FilamentShield\Traits\HasPageShield;

class MyPage extends Page
{
    use HasPageShield;
    ...

    protected function beforeBooted : void() {
        ...
    }

    protected function afterBooted : void() {
        ...
    }

    /**
     * Hook to perform an action before redirect if the user
     * doesn't have access to the page.  
     * */
    protected function beforeShieldRedirects : void() {
        ...
    }
}

Pages Redirect Path

HasPageShield uses the config('filament.path') value by default to perform the shield redirection. If you need to overwrite the rediretion path, just add the next method to your page:

<?php

namespace App\Filament\Pages;

use ...;
use BezhanSalleh\FilamentShield\Traits\HasPageShield;

class MyPage extends Page
{
    use HasPageShield;
    ...

    protected function getShieldRedirectPath(): string {
        return '/'; // redirect to the root index...
    }
}

Widgets

if you have generated permissions for Widgets you can toggle their state based on whether a user have permission or not. You can set this up manually but this package comes with a HasWidgetShield trait to speed up this process. All you have to do is use the trait in you widgets:

<?php

namespace App\Filament\Widgets;

use ...;
use BezhanSalleh\FilamentShield\Traits\HasWidgetShield;

class IncomeWidget extends LineChartWidget
{
    use HasWidgetShield;
    ...
}

Policies

Role Policy

To ensure RoleResource access via RolePolicy you would need to add the following to your AuthServiceProvider:

//AuthServiceProvider.php
...
protected $policies = [
    'Spatie\Permission\Models\Role' => 'App\Policies\RolePolicy',
];
...

You can skip it if you have enabled it from the config:

// config/filament-shield.php
...

'register_role_policy' => [
    'enabled' => true,
],
...

Policy Path

If your policies are not in the default Policies directory in the app_path() you can change the directory name in the config file:

...
'generator' => [
    'option' => 'policies_and_permissions',
    'policy_directory' => 'Policies',
],
...

Custom folder structure for Models or Third-Party Plugins

Shield also generates policies and permissions for third-party plugins and Models with custom folder structure and to enforce the generated policies you will need to register them in your application's AuthServiceProvider:

...
class AuthServiceProvider extends ServiceProvider
{
    ...
    protected $policies = [
        ...,
        'App\Models\Blog\Author' => 'App\Policies\Blog\AuthorPolicy',
        'Ramnzys\FilamentEmailLog\Models\Email' => 'App\Policies\EmailPolicy'

    ];

Users (Assigning Roles to Users)

Shield does not come with a way to assign roles to your users out of the box, however you can easily assign roles to your users using Filament Forms's Select or CheckboxList component. Inside your users Resource's form add one of these components and configure them as you need:

// Using Select Component
Forms\Components\Select::make('roles')
    ->relationship('roles', 'name')
    ->multiple()
    ->preload()
    ->searchable()
                    
// Using CheckboxList Component
Forms\Components\CheckboxList::make('roles')
    ->relationship('roles', 'name')
    ->searchable()

You can find out more about these components in the Filament Docs

• Select
• CheckboxList

Layout Customization

You can easily customize the Grid, Section and CheckboxList's columns() and columnSpan() without publishing the resource.

use BezhanSalleh\FilamentShield\FilamentShieldPlugin;

public function panel(Panel $panel): Panel
{
        return $panel
            ...
            ...
            ->plugins([
                FilamentShieldPlugin::make()
                    ->gridColumns([
                        'default' => 1,
                        'sm' => 2,
                        'lg' => 3
                    ])
                    ->sectionColumnSpan(1)
                    ->checkboxListColumns([
                        'default' => 1,
                        'sm' => 2,
                        'lg' => 4,
                    ])
                    ->resourceCheckboxListColumns([
                        'default' => 1,
                        'sm' => 2,
                    ]),
            ]);
}

Translations

Publish the translations using:

php artisan vendor:publish --tag="filament-shield-translations"

Available Filament Shield Commands

shield:doctor

• Show useful info about Filament Shield.

shield:install

Setup Core Package requirements and Install Shield. Accepts the following flags:

• --fresh re-run the migrations
• --only Only setups shield without generating permissions and creating super-admin

shield:generate

Generate Permissions and/or Policies for Filament entities. Accepts the following flags:

• --all Generate permissions/policies for all entities
• --option[=OPTION] Override the config generator option(policies_and_permissions,policies,permissions)
• --resource[=RESOURCE] One or many resources separated by comma (,)
• --page[=PAGE] One or many pages separated by comma (,)
• --widget[=WIDGET] One or many widgets separated by comma (,)
• --exclude Exclude the given entities during generation
• --ignore-config-exclude Ignore config exclude option during generation
• --ignore-existing-policies Do not overwrite the existing policies.

shield:super-admin

Create a user with super_admin role.

• Accepts an --user= argument that will use the provided ID to find the user to be made super admin.

shield:publish

• Publish the Shield RoleResource and customize it however you like

shield:seeder

• Deploy easily by setting up your roles and permissions or add your custom seeds

Testing

composer test

Changelog

Please see CHANGELOG for more information on what has changed recently.

Contributing

Please see CONTRIBUTING for details.

Security Vulnerabilities

Please review our security policy on how to report security vulnerabilities.

Credits

• Bezhan Salleh
• All Contributors

License

The MIT License (MIT). Please see License File for more information.